Product Description and uses: A hardwearing gloss finish especially designed for interior use on floors constructed of concrete, stone, brick. Can also be used on timber floors. New concrete floors must be allowed to dry out completely before applying Crown Floor Paint.
Characteristics: Based on a tough resin medium, pigmented to provide abrasion resistance and first class adhesion.
Advantages: Easy to apply. Good opacity, fast drying adhesion and water resistance.
Application: Apply evenly by brush.
Thinning: On new (dry) concrete floors the first coat should be thinned, with Crown White Spirit, to ease brushing and ensure penetration into the substrate. Subsequent coats should only be thinned if necessary. Avoid overthinning. Stir well before use.
Drying times: Re-coatable in 16 hours in normal conditions.
Note: If Crown Concrete Floor paint does not dry this indicates that either moisture is still present in the floor or, on previously painted floors, polish, grease, dirt etc, has not been completely removed.
Spreading capacity: 12-14 m2/l when applied on a normal smooth surface. The spreading capacity will be reduced when applied to unpainted concrete and on rough surfaces.
Equipment cleaner: Crown White Spirit
Colour range: Available in Red Oxide, Grey and Green.
Pack size: 1 litre, 4 litres and 20 litres.
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and through Crown Stockists.
New (dry) concrete surfaces: Prepare surface (refer surface preparation data sheet SP 1). Apply 2 or 3 coats Crown Concrete floor paint. (see note 1 below).
Previously painted surfaces: Prepare surface. Apply two coats Crown Concrete Floor Paint (1 coat may be sufficient when repainting a sound surface of a similar colour). (see note 2 below).
For health & safety information, please refer to our Material Safety Data Sheet (MSDS)