CROWN GYPSUM FILLER

Surface Preparation: Remove loose materials, dust, grease, fungi, algae, and old paint flakes. Ensure surfaces are clean before application.

Mixing: Mix 1 part water with 2 parts powder by volume. Allow to mature for 1–2 minutes and use a low-speed mixer.

Application: Apply using a steel trowel, spatula, or putty knife to fill joints, cracks, and surface imperfections.

Coating: Apply a second coat once the first coat has fully set. Total coat thickness should not exceed 2 mm.

Finishing: Allow to dry, then sand smooth using P320 grit sandpaper before applying an undercoat and topcoat.

Drying Time: Surface dry in 1 hour, setting time of 2 hours, and ready for sanding after 4 hours.

Cleaning: Clean tools with water.

Low Shrinkage: Minimises shrinkage during drying for a reliable finish.

Crack-Resistant: Helps achieve a durable, non-cracking finish.

Excellent Workability: Easy to mix and apply for efficient application.

High Filling Power: Effectively fills cracks, holes, joints, and surface imperfections.

Smooth Finish: Creates a smooth surface ready for sanding and painting.

High Stability: Provides a stable finish on properly prepared surfaces.

Easy to Sand: Allows effortless smoothing for a professional finish.

Low VOC: Formulated with low volatile organic compound content.

Quick Setting: Initial setting time of 25–45 minutes supports efficient application and reduced on-site wastage.