- ABOUT US
- OUR SERVICES
- MEDIA CENTRE
Excellent for exterior walls with stain protection and water resistance, providing long lasting colours for walls.
Crown Permacote Exterior Emulsion with Teflon® is a Super Premium, pure acrylic based exterior decorative and protective paint incorporated with Teflon® additive which allows it to become even more scrubbable, stain resistant and easier to clean than any other exterior matt finish. Suitable for new and previously painted plaster, cement, brick, stone, softboard, hardboard, asbestos etc.
Characteristics: Manufactured from Pure Acrylic emulsion, combined with special Biocides to resist and greatly retard mould and algae and Teflon® additive to increase stain resistance and self-cleansing in the rains and to attract less dust contaminates.
Advantages: Washable, Easy wipe, Splash and Stain resistant. High covering power. Easy to apply-no special application or equipment needed. Rapid drying-two coats the same day. Can be applied on all types of surfaces subject to normal preparation. Waterborne system. Virtually odour free. Widest possible colour range. Long term protection. Reduced maintenance costs. Hides surface imperfections. Effective for filling hair line cracks.
Application: By brush, roller or airless spray equipment.
Thinning: Supplied ready for use. If required, first coat can be thinned with up to 15% clean water. Avoid over thinning as this will affect the opacity. Stir well before use.
Drying times:Touch Dry: 1-2hours. Re-coatable after 3-4 hours.
Equipment cleaner: Water and household detergent.
Spreading Capacity: See Table Below (m2/l)
|Surface type||New or Unpainted||Previously painted|
|Smooth- Lime Plaster||12 -14||13 – 17|
|Cement-Wood Float||10 -12||12 -14|
|Bag Wash-Concrete Blocks||5 -7||6-8|
|Tyrolean / Roughcast||2 – 4||3 – 5|
Colour range: Over 7,000 Colours including BS 4800 Crown House Colours plus any other shades from our Tinting system.
Pack sizes: 1 litre, 4 litres and 20 litres.
Availability: From Crown Depots in Nairobi, Kisumu and Mombasa and through Crown Stockists.
New Work: Apply 3 coats Crown Permacote Exterior Emulsion with Teflon® with first coat thinned up to 15% with clean water.
Surfaces Previously Painted in Water-based Paint: Ensure the surface is clean and free of powdery or flaking material. If the surface is still suspect, apply 1 coat of Crown Penetrating Primer and allow to dry overnight. Then apply 2 coats Crown Permacote Exterior Emulsion with Teflon®.
Previously Gloss Painted Surfaces: Ensure that the gloss finish is thoroughly rubbed down to provide a key. Apply 1 coat of Crown Undercoat followed by 2 coats Crown Permacote Exterior Emulsion with Teflon®.
Loosely bound & lime-washed, cement painted, distempered surfaces: Remove all loose and flaking material down to a firm base, where necessary removing all previous coatings down to the original building fabric (refer Surface Preparation Data Sheet SP 1). Apply 1 coat Crown
Penetrating Primer: Apply 2 coats Crown Permacote Exterior Emulsion with Teflon®
For health & safety information, please refer to our Material Safety Data Sheet (MSDS)