Offers superior stain protection with stunning matt finishes & fresh looking colours with excellent durability.
A top quality matt emulsion incorporated with Teflon® additive which improves stain resistance to allow minimal to nil penetration of normal household liquids like tea, juice, ketchup etc, allowing these to be simply scrubbed off with water without leaving stains on the surface. However, some stubborn stains might still need to be cleaned with a mild detergent. Suitable for new and previously painted plaster, cement, brick, stone, asbestos softboard and hardboard sheets etc. It has exceptional ease of application and dries to a smooth, matt highly washable finish.
Characteristics: Manufactured form the finest quality, carefully selected pigments, finely ground in a copolymer emulsion with Teflon® additive.
Advantages: Washable. Easy wipe. Splash and Stain Resistant. More durable than other matt paints. Excellent hiding power. Quick drying. Easy to apply. No primer required on new and sound previously painted masonry surfaces. Wide colour range. Smooth matt finish. Suitable for interior and exterior use. Allows new walls, still containing moisture to breathe/dry out.
Application: By brush, rollers, conventional or airless spray.
Thinning: Supplied ready for use. However, on new, bare and porous surfaces and for spray application Crown Matt Emulsion with Teflon® can be thinned up to 15% with clean water for first coat on new surfaces to aid penetration into porous surfaces. Avoid over-thinning as this will affect the opacity. Stir well before use.
Drying Times: Touch Dry: 1 – 2 hours. Re-coatable in 3- 4 hours.
|Surface type||New or Unpainted||Previously painted|
|Smooth- Lime Plaster||11 -13||12 – 14|
|Cement-Wood Float||10 -12||12 -14|
|Bag Wash-Concrete Blocks||5 -7||6 – 8|
|Tyrolean / Roughcast||2 – 4||3 – 5|
Equipment Cleaner: Water.
Colour range: Over 6,000 Colours including BS 4800 Crown House Colours plus any other shades from our Tinting system.
Pack Sizes: 1 litre, 4 litres, and 20 litres.
Availability: From Crown Depots in Nairobi, Kisumu, and Mombasa and through Crown Stockists.
New Work: Apply 3 coats Crown Matt Emulsion with Teflon® with first coat thinned up to 15% with clean water.
Surfaces Previously Painted in Water based Paint: Ensure the surface is clean and free of powdery or flaking material. If surface is still suspect, apply 1 coat of Crown Penetrating Primer and allow to dry overnight. Then apply 2 coats Crown Matt Emulsion with Teflon®.
Previously Gloss Painted Surfaces: Ensure that the gloss finish is thoroughly rubbed down to provide a key. Apply 1 coat of Crown Undercoat followed by 2 coats Crown Matt Emulsion with Teflon®.
Loosely bound & lime-washed, cement painted, distempered surfaces: Remove all loose and flaking material down to a firm base, where necessary removing all previous coatings down to the original building fabric (refer Surface Preparation Data Sheet SP 1). Apply 1 coat Crown
Penetrating Primer: Apply 2 coats Crown Matt Emulsion with Teflon®