Designed especially for use on concrete floor screeds on areas to be used for tennis and badminton courts, basketball, gymnastics etc.
Characteristics: Manufactured from a high-quality copolymer emulsion incorporating carefully selected pigments.
Advantages: Can be applied to new (dry) screeds. Creates desired colour effect. Matt finish provides good foot grip. For interior and exterior use.
Application: Brush application is recommended. Brush the first coat well into the surface to guarantee good adhesion.
Thinning: The 1st coat should be thinned with clean water to ease brushing and to aid penetration into the floor screeds. Subsequent coats can be thinned if necessary with a little clean water. Avoid overthinning. Stir well before use.
Drying Times: Re-coatable in 4 hours.
Spreading capacity: When applied on good wood float floor screeds Crown Tennis Court Paint will cover 8-10 m2/l. When applied to a Tarmacadam surface the spreading capacity will be considerably reduced – approximately 5m2/l.
Equipment Cleaner: Water.
Colour range: Supplied in special Tennis Court Green for the playing surface. Also available in Copper for use on concrete areas surrounding the playing area. Line markings can be painted in Crown Road Marking Paint.
Pack Sizes: 4 litres and 20 litres.
New Concrete Screeds: Ensure the floor screed is reasonably dry – do not apply to wet floor screeds. Prepare surface (refer surface preparation Data Sheet SP 1). Apply 3 coats Crown Tennis Court Paint ensuring that the 1st coat is thinned with clean water and brushed well into the surface.
New Tarmacadam Surface: Allow the new court to weather for at least six weeks before painting. Dry brush all dirt from the surface and remove any loose chippings. Ensure the surface is perfectly dry and oil and dirt free at the time of painting. Apply 2 thin coats of Crown Tennis Court Paint. Brush well into the surface.