- ABOUT US
- OUR SERVICES
- MEDIA CENTRE
Extremely tough and attractive 2 or 3 colour silk finish for use in commercial, domestic and industrial buildings. Particularly suitable in bathrooms, kitchens, cloakrooms, staircases, corridors, entrance halls and lift lobbies, banking halls, office partitioning and walls etc.
Particularly recommended for use in hospitals, clinics, laboratories, food factories, bottling Plants, hotel reception areas and high traffic areas where regular cleaning is necessary and an attractive, durable finish is desirable.
Can be applied over suitably prepared plaster, wood, metal, asbestos etc, and on previously painted, sound surfaces.
Characteristics: A unique formulation incorporating modified rubberized resin and finest quality selected pigments.
Advantages: Attractive appearance. Flexible, abrasion resistant finish. Good heat and chemical resistance. Impermeable to moisture. Easily cleaned and can be scrubbed repeatedly without damage. Alkali-Resistant, suitable for use on new (dry) plastered surfaces.
Finish: Semi-Matt, Silk Finish.
Application: Must be applied with single-jet spray equipment only by experienced applicators at strictly controlled pressure.
Thinning: Must not be thinned.
Drying Times: Dries in 1-2 hours. Attains a maximum hardness after 2-3 days.
Spreading Capacity: Duo-Tone is applied “wet on wet” creating a several coats, high build finish, and a very low spreading capacity. The spreading capacity will vary depending on the colours in use, the surface being coated and the applicators technique. Equipment should be cleaned immediately after use with Crown White Spirit.
Colour range: Duo-Tone is available in a wide variety of colour combinations based on selected background colours and contrasting colours chosen from the BS 4800 shade range.
Pack Sizes: 1 litre and 4 litre tins.
Availability: Only specialists, approved spray subcontractors apply Duo-Tone. Consult Crown for full details.
Prepare surface (refer surface preparation Data Sheet for plaster SP 3 or other surfaces where appropriate). Apply a minimum of 1 coat of appropriate primer by brush. Duo-Tone to be spray applied by specialist, experienced spray applicator.
For health & safety information, please refer to our Material Safety Data Sheet (MSDS)