Italia due, Adhesives, Automotive, Industrial, Intermediate, Road Marking, Thinners, Decorative, Wood Finishes, ZERO VOC, crown paints

Italia Due Decorative Paint

Create captivating futuristic landscapes with this unique paint that becomes activated by light, bringing its tones to life for a spectacular bedazzling effect. This is for spaces that combine classic refinement with a breathtaking metallic finish.

Product Description

Description & Uses

Crown ITALIA DUE Neutral coat is a new innovative paint combining pearlescent effect \ with unique texture appearance with coloured flakes.

Advantages

The paint enables you to fill your walls with iridescent light tricks that change every time you view it from a different angle. With this, your wall will have a spectacular effect of shadow and chiaroscuro.

Characteristics

For decorative of interior walls, ceilings, brickwork and cement boards with a unique pearlescent finish.

Finish:– Matt Finish
Application:

– Apply by brush only.

Thinning & Mixing:

-No Thinning required. Ready to use. Stir well before use.

Drying Times:

-Single coat (@ 28ºC, 50% RH)

-Touch Dry ≤ 3 Hours (Dry enough to touch)
Complete Hard Dry ≤ 72 hours to achieve performance properties like waterproof, light nail scratch resistance & other properties

-Recoating Time – Not necessary

Spread Rate :

7-9 Sqmt /Litre (depending on surface evenness)

Equipment Cleaner:

-Water

Colour range:

-Clear with Shades as per Shade card

Pack Sizes:

-1 litre & 4 litres.

Availability:

-From Crown Depots and through Crown Stockiest.

Specifications:

Depending on the final Crown Italia finishes, Crown Italia Primer will require to be tint to make colours.

General / New – Surfaces must be sound, clean, dry and free from all defective or poorly adhering materials, dirt, grease or wax. To have the better finish, rub down surface using suitable abrasive and dust off. Apply 2 coats of Crown ITALIA Series Primer.

After 1 Hour apply 1 coat of CROWN ITALIA DUE NEUTRAL COAT & allow it to dry for 3 hours for touch dry. .

Previously Painted – Remove all loose, defective and unstable paint film or powdery residue by brushing thoroughly and scraping. Repair minor defects and cracks with suitable filler. Apply 2 coats of Crown ITALIA Series Primer.
(For chalkiness on surface from old paint, apply 1 coat of CROWN PLUS 3 MASONARY PRIMER. Allow it to dry for 4 hours’ prior application of Crown Italia Primer).

After 1 Hour apply 1 coat of CROWN ITALIA DUE NEUTRAL COAT & allow it to dry for 3 hours for touch dry.

Crown Italia Series ProductsCrown Italia Primer GuidelineTop Coat Tinting required or Adding Pearl Pigment/SupGlitter
Crown Italia Wow

No

No Primer Required

Add SupGlitter at Crown Depot or authorized stockist

Crown Italia Uno

Yes

Use Crown Italia Primer Primer White only.

Coloured Neutral Coat Topcoat required as per the Shade. Refer Shade card.

Crown Italia Uno Plus

Yes

Use Coloured Primer as per the shade. Refer Shade card

Add Pearl Pigment as per the shade at Crown Depot or authorized stockist. Refer Shade card.

Crown Italia Due

Yes

Use Coloured Primer as per the shade. Refer Shade card

Add Pearl Pigment as per the shade at Crown Depot or authorized stockist. Refer Shade card

Please Note: The addition of pearl pigment strictly be done at Crown Depots & authorized stockiest only. As after addition of pearl pigment & SupGlitter, the mix requires shaker for proper mixing. If not shaken for 2-3 minutes may find defects like shade variation or loose adhesion of SupGlitter after drying

Safety, Health and Environmental Information

– When applying paint, it is advisable to wear eye protection and suitable gloves.- In

– In case of contact with eye, rinse with plenty of water immediately and seek medical advice.

– Remove splashes of paint from skin by using soap or water.

– Keep container tightly closed and away from food, drinks, animal feed and out of the reach of children.- Ensure good ventilation during application and drying.

– Ensure good ventilation during application and drying.- Paint must always be stored in

– Paint must always be stored in an upright position and a cool place.

– Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations.

– Refer to Material Safety Data Sheet for complete product safety information.

 

Related Products
Upcoming Events: